CBRT has been

In need of a good rotor

A place to ask questions about base setup for CB radios or HAM radios. Talk about your experiences, seek advice, and share knowledge.
Post Reply
User avatar
Dirty Red

In need of a good rotor

#102737

Post by Dirty Red »

Hey i got question? What is the best or econimcal priced rotor to buy for a 7 element maco antenna which wil be attached to some lmr 400 db :?:
User avatar
crazytruker

#102739

Post by crazytruker »

For an antenna that size i don't know how economical you can be. I have a shooting star with a HAM IV rotor under it. Last price i saw for one of those new was 5 bills
User avatar
231

#102781

Post by 231 »

Much of the answer to your question is how you plan on supporting the antenna. If it's inside a tower, you should be able to get away with a Ham II, CD-44, or even an old Alliance HD-73 (which is what I use). If you plan on using a tubular tower such as the US Tower, or some other outside of the tower set up with the bottom clamp assembly you'll indeed need a decent sized rotor. The rated wind load capability on rotors is cut in half outside of a tower.

That being said, you can usually pick up a decent used one on ebay reasonably priced.

;)
User avatar
frogman

#102816

Post by frogman »

i have the same antenna...it's still in the box..got a good deal on it...but i do have a shooting star up there now..i use a Ham III under it...

way i look at it...doesn't hurt to have some overkill...

on flat side you could have a ham II or ham III....verticle.....i would want a ham IV or bigger
User avatar
Dirty Red

#104554

Post by Dirty Red »

First I want to thank you all for your replies and to the ones that viewed my question.I will be setting up this antenna on a 50 ft crank up and the rotor will be mounted on the out side. I also will have the tilt feature too. So if a storm (hurricane) blows i can get out of harms way. Any way i hope to find a tailtwister and i think i have. So again thanks fo the replies and looks. DIRTY RED DOWN IN THE SAND BOX GETTIN DIRTY :twisted: :idea:
User avatar
BtyMONSTER

#104611

Post by BtyMONSTER »

this may be helpful in finding one ........
[Please login or register to view this link]
User avatar
psycho

Re: In need of a good rotor

#104616

Post by psycho »

Dirty Red wrote:Hey i got question? What is the best or econimcal priced rotor to buy for a 7 element maco antenna which wil be attached to some lmr 400 db :?:
If you are looking for a rotor, Worldwide Amplifiers sells reconditioned Ham IV and Tail Twisters for very reasonable prices.
User avatar
BigBopper

#104623

Post by BigBopper »

[Please login or register to view this link]
User avatar
damn yankee
6 PILL USER
6 PILL USER
Posts: 60
Joined: Aug 23 2007, 15:20
Contact:

#107555

Post by damn yankee »

If you buy used look for 8 wires or ask if it has a break
Post Reply