CBRT has been

anyone use the new 'max 2000' ? (not the imax)

A place to ask questions about base setup for CB radios or HAM radios. Talk about your experiences, seek advice, and share knowledge.
Post Reply
User avatar
209 first class
Donor
Donor
Posts: 3,920
Joined: Jul 17 2007, 10:50

anyone use the new 'max 2000' ? (not the imax)

#148214

Post by 209 first class »

i was working on an antenna project, it wasnt flying very well if you know what i mean. the salesman assured me that the max2000 is the same as an imax2000, antron bought the copyrights from solarcon and now makes the antenna??? is that correct? box says 'holland ohio'. but it still says solarcon too. it wouldent matter, but the antenna is a DUD. here i am feeling foolish for buying 285 feet of lmr 400 cuz it didnt work out, and the whole time it was the antenna. i put my 8 year old antron 99 up, and PRESTO, good results. the max2000 wouldent tune for crap,there must be a wire loose inside. anyone else used one? maybe it was just my turn for bad luck? :) 2zero9
2zero9 workin this top secret station in massachusetts.
User avatar
Tankerdave
2 PILL USER
2 PILL USER
Posts: 15
Joined: Feb 19 2007, 12:38

max 2000

#148232

Post by Tankerdave »

Hey 209, I have a max 2000, works great but this is my 2nd one, 1st one had a dead short and would not tune at all. I originally had an Antron 99 but it got hit with lightening. Replaced with the max 2000. I like it and can tell a difference between the two, but like I said it took two to get a good one. Good luck and hope this helps
User avatar
TwentyTwo-Zero
Donor
Donor
Posts: 1,742
Joined: Oct 23 2007, 12:48

#148238

Post by TwentyTwo-Zero »

Hi 2zero9,

I purchased the Max 2000 a few months back after my antenna was damaged in a wind storm. The box it came in also says Solarcon and that it is made in Holland, Ohio. A lot of the sites that I looked at during my purchase process called it the "Max 2000" but had statements like "aka Imax 2000", "Imax", "also known as Imax 2000". etc. I figured that these were just nicknames for the antenna, and that they are one in the same. My antenna was pretuned and has a 1.05:1 to 1.1:1 match across the 11m band. I don't know if the copyright has been bought by another company or not, but since a previous poster said they had a bad antenna out of the box I would suggest sending it back for a replacement. I know this won't do anything for the frustration and delay, but I think you will be happy with the antenna once you get a functioning unit. Good luck!
Save Your Money, Don't Go To The Show
And Don't You Eat That Yellow Snow...Frank Zappa
------------
WR0220 Washington State 38LSB
CPI • Cobra • Icom • Yaesu
User avatar
mistman250
Donor
Donor
Posts: 166
Joined: Feb 13 2007, 10:22
Contact:

#148239

Post by mistman250 »

OOPS! I thought I had bought a I-max 2000 but after reading this post it turns out I bought a Max-2000 oh well. I didn't have any trouble with mine, it was sort of just plug and play. I never touched it and I get 1.1 across the band. I am also using 125' of RG-8 (the big stuff). Maybe I just got lucky.
Do unto others before they do unto you....
User avatar
Pocono Redneck
Donor
Donor
Posts: 923
Joined: Apr 09 2007, 07:43
Contact:

#148240

Post by Pocono Redneck »

A buddy of mine down the road and I each got a Max2K last year from Radioactive and both were fine right out of the box---without adjusting anything they are flat 1.1-1 across the CB band

No problems here at all...
User avatar
Punkin Head

#148261

Post by Punkin Head »

I think mine is actually a max 2000 too. it is the exact same as a imax as far as I can tell. no troubles with me it works dx and talks local just fine. Great antenna
User avatar
Reddog355
Skipshooter
Skipshooter
Posts: 249
Joined: Sep 08 2007, 14:03

#148269

Post by Reddog355 »

I use one of these also.Straight out th box it was 1.1 across all 40 ch so their was no need to touch anything.Works great and i think it receives better than my old A99.

Later Reddog
User avatar
2 wheel
6 PILL USER
6 PILL USER
Posts: 67
Joined: Aug 26 2007, 19:33
Contact:

#148309

Post by 2 wheel »

I also have the Imax 2000 out of the box with my cobra 29 it was 1.1 across the entire 40 25 foot to the feed point and with 50 ft of knock off lmr 400 (cnt 400). It talks and receives great. Now with my 4600 turbo the swr's are like 1.3, 1.4 across but the radio has been clipped and cranked to its max. other than that its a great antenna.
User avatar
Bolt cutter
Donor
Donor
Posts: 473
Joined: Jan 04 2007, 19:32
Contact:

#148314

Post by Bolt cutter »

Same thing here. I have the I-MAX with 250' of 217. Never touched a thing 1.1
mistman250 wrote:OOPS! I thought I had bought a I-max 2000 but after reading this post it turns out I bought a Max-2000 oh well. I didn't have any trouble with mine, it was sort of just plug and play. I never touched it and I get 1.1 across the band. I am also using 125' of RG-8 (the big stuff). Maybe I just got lucky.
Let's do some WATTS!
Post Reply