tubes are not lighting up nor is the meter on the front of the unit however the fan is operating
What should I be looking for ??
Palamor 300 A
-
DX-300
- NEW DUCK
- Posts: 2
- Joined: January 1st, 2009, 8:44 pm
- Handle: DX300
- Real Name: Todd
- Antenna: Mosley MB-11 Vert
- Radio: Kenwood TS-570
- Contact:
-
TICKDOG
- 4 PILL USER
- Posts: 31
- Joined: December 14th, 2008, 6:53 am
- Handle: TICKDOG
- Real Name: Chuck
- Contact:
-
Fixer
- 2 PILL USER
- Posts: 17
- Joined: April 20th, 2008, 4:48 pm
- Handle: Fixer
- Real Name: Alan
- Radio: Brownings
- Contact:
-
Night Crawler
- Wordwide & Qualified
- Posts: 3,836
- Joined: May 15th, 2007, 9:03 am
- Contact:
RE Palamor 300 A
Check to see if your getting filament voltage to the tubes. Check the secondary filament winding on the power transformer should be the two green wires. With a volt meter set for AC voltage reading it should read about 12-14 volts. Also check for a bad wiring connection between the power supply and the amplifier.DX-300 wrote:tubes are not lighting up nor is the meter on the front of the unit however the fan is operating
What should I be looking for ??
