CBRT has been

Cobra 29 and 102 install

This is the place to post your general tips or ask questions about your installation, whether it's for mobile or base stations.
Post Reply
User avatar
Fireman
2 PILL USER
2 PILL USER
Posts: 11
Joined: Oct 06 2008, 19:14
Real Name: Adam
Radio: Cobra 29
Contact:

Cobra 29 and 102 install

#225691

Post by Fireman »

I installed my cobra 29 today and antenna. I used a 102 with a spring. My SWR is high and varies i have grounded the antenna. i dont know if the coax running from the radio to the meter is too long? Also sometimes the radio speaker works and sometimes it doesnt.
User avatar
White Lightning
Wordwide & Qualified
Wordwide & Qualified
Posts: 1,047
Joined: Oct 20 2006, 14:48
Real Name: Clayton
Antenna: 102' SS Whip
Radio: Cobra 29 LTD Chrome
Contact:

Re: Cobra 29 and 102 install

#225879

Post by White Lightning »

Fireman wrote:I installed my cobra 29 today and antenna. I used a 102 with a spring. My SWR is high and varies i have grounded the antenna. i dont know if the coax running from the radio to the meter is too long? Also sometimes the radio speaker works and sometimes it doesnt.
How much coax are you running? you might have a loose wire going to the speaker inside the radio
2009 Silverado Ext Cab
Cobra 29 LTD Chrome 102' SS Whip
User avatar
Circuit Breaker
Donor
Donor
Posts: 1,665
Joined: Oct 27 2006, 12:30
Handle: Circuit Breaker
Real Name: Stephen
Call Sign: K7CB
Antenna: OCF Dipole
Radio: HR2510/Yaesu FT-950
Contact:

Re: Cobra 29 and 102 install

#225884

Post by Circuit Breaker »

You can certainly have too much coax...but that won't (or shouldn't) affect the SWR. If it does, then there's something else wrong. How is this antenna installed? You may need to run more than one "ground" wire. The bed of my truck is made of a high impact plastic composite...no metal at all. When I installed my 102" whip, I had to add three "ground" wires to bring the SWR down. I have one attached to each corner of the mount closest to the cab and ran each one to the frame on each side of the vehicle. Then I added one more to one of the bolts holding the mount to the bed and connected that to the frame. Now my SWR is 1.0:1 from 26.000 to 27.405 when it starts to climb.
Yaesu FT-950
Yaesu FT-8100
Icom IC-2820 (with D-Star capability)
Kenwood TR-751 2M all mode mobile
Kenwood TM-3530 220 MHz mobile
Uniden Washington Base
Uniden HR-2510
Icom ID-92 HT
SteppIR 40-6M Yagi
OCF 75/80M dipole
Diamond V2000A 6M/2M/70cm ground plane antenna
Antron 99
User avatar
626
Donor
Donor
Posts: 1,158
Joined: Apr 04 2008, 00:28

Re: Cobra 29 and 102 install

#225885

Post by 626 »

With questions like this there are many other possible issues. What kind of vehicle is it? Where is the antenna mounted? What kind of mount are you using with the spring, for example, ball mount? How are you measuring your SWR, and when you say your SWR is high what is the ratio, or number? Please describe how you "Grounded" your antenna.

Bad coax can cause your SWR to vary. The length of the Coax is inconsequential.

Try a different speaker. if that doesnt solve your problem then it may be a loose jack or a loose connection elsewhere inside the radio.

Let us know

GUNNY
User avatar
linx

Re: Cobra 29 and 102 install

#225891

Post by linx »

I'd also check the spring. Those things don't last forever. Sometimes they're bad brand new. It's just a really thin piece of braid that goes down the middle of the spring. That thing can break off easily.
User avatar
Roper
Duckplucker
Duckplucker
Posts: 185
Joined: Mar 16 2007, 15:46
Real Name: Steven
Antenna: 102' SS Whip
Radio: Cobra 29 LTD Classic
Contact:

Re: Cobra 29 and 102 install

#226110

Post by Roper »

Good deal Fireman you finally got in :geek:
2011 Chevrolet Silverado Ext Cab Dually
Cobra 29 LTD Classic 102' SS Whip
User avatar
Fireman
2 PILL USER
2 PILL USER
Posts: 11
Joined: Oct 06 2008, 19:14
Real Name: Adam
Radio: Cobra 29
Contact:

Re: Cobra 29 and 102 install

#226167

Post by Fireman »

Thanks for everyone ones reply and sorry it took so long to get back on, i cannot access this site at work. The antenna was mounted on the pass. side steak pocket closest to the cab, i moved it to the rear one and the SWRs have gone down. I have talked to several people on the radio and it is working great right now. Again thanks. Fireman
User avatar
White Lightning
Wordwide & Qualified
Wordwide & Qualified
Posts: 1,047
Joined: Oct 20 2006, 14:48
Real Name: Clayton
Antenna: 102' SS Whip
Radio: Cobra 29 LTD Chrome
Contact:

Re: Cobra 29 and 102 install

#226347

Post by White Lightning »

Now that's what I like hearing good job Fireman
2009 Silverado Ext Cab
Cobra 29 LTD Chrome 102' SS Whip
Post Reply