12 Tube D&A phantom
-
crazy_cooter
- Skipshooter
- Posts: 397
- Joined: June 15th, 2011, 8:30 am
- Real Name: Tyler Sanders
- Antenna: Penetrator 500
- Radio: Browning Mark III
- Contact:
12 Tube D&A phantom
I have a 12 tube Phantom that I had replaced the center HV relay in about 6 months ago. The amp worked before I replaced the relay, but the relay was arcing because it was cracked. After the replacement, I turned on the filament power and BANG! I must have crossed a wire. This is the only 12 tube I have, so I cannot open up any of my others to compare the wiring. My 10 tube is very different, so I cannot go by that. The schematic I found online doesnt look like a 12 tube schematic, it looks like a 10, and is very hard to read. Does anyone have a 12 tube phantom schematic?
![[ external image ]](http://s3.postimage.org/wl9wei4k/014.jpg){kind=link}