Hi All,
My course knob works as it is supposed to. If I turn it clockwise, it goes up in frequency. If I turn it counter clockwise, it goes down in frequency. The fine knob is the odd one. When I turn the fine knob clockwise, the frequency goes down. When I turn the fine counter clockwise, the freq goes up. Is this an easy fix to swap the movement of the fine protion of the clarifier? I have a Cobra 2010 GTL WX. Pretty much the same radio as the Cobra 148 GTL and Cobra 2000 GTL. This is the last Base Radio Cobra made. It replaced the Cobra 2000 GTL.
Odd Clarifier issue.
-
DXer
- 4 PILL USER
- Posts: 28
- Joined: Nov 29 2012, 14:48
- Handle: DXer
- Real Name: Jeremy
- Radio: Several
- Contact:
-
sonoma
- Donor
- Posts: 1,459
- Joined: Apr 02 2006, 15:10
- Handle: sonoma
- Real Name: sonoma
- Radio: President Washington
- Contact:
Re: Odd Clarifier issue.
just swap the 2 outer wires that go to the portion of the clarifier you want to change direction in. leave the center wire alone.the 2 outer will change the direction.
-
MDYoungblood
- Site Admin
- Posts: 10,803
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Odd Clarifier issue.
Hello DXer,
I would leave it alone, it makes your radio unique. I don't know anyone with the 2010GTL to see if they came that way or not.
3's
Greg
I would leave it alone, it makes your radio unique. I don't know anyone with the 2010GTL to see if they came that way or not.
3's
Greg
-
DXer
- 4 PILL USER
- Posts: 28
- Joined: Nov 29 2012, 14:48
- Handle: DXer
- Real Name: Jeremy
- Radio: Several
- Contact:
Re: Odd Clarifier issue.
It never used to be this way. I took the radio to the shop to get it realigned because it was sitting in my garage for a few years after I moved to my new place. When I went to pick it up, the tech said he unlocked the clarifier and also tuned the radio. I had no issue with this because, I like that now that I can slide down or up in between feqs for DXing. But after getting the radio back, this is when I noticed that the fine knob was backwards. I called the shop back after a few months because I didn't have time to take it back and it's not a huge deal, but now the radio tech no longer works there and the shop stated they are no longer hiring service techs. I am knowledgeable on radio's just don't have all the equipment the tech's do to properly align the radio. I guess I could have done it my self by getting it close, but figured have it done right one time, and not worry about it anymore.MDYoungblood wrote:Hello DXer,
I would leave it alone, it makes your radio unique. I don't know anyone with the 2010GTL to see if they came that way or not.
3's
Greg
Saturday, 23 February 2013, 9:43 AM
So just swapping the two outside wires will change the pot direction? That sounds easy enough.sonoma wrote:just swap the 2 outer wires that go to the portion of the clarifier you want to change direction in. leave the center wire alone.the 2 outer will change the direction.
