So proud to build this little radio and get a feeling of accomplishment, I would prolly build another if they still sold 'em.
Anyway I saw a mod to convert from an RCA antenna jack to a PL259 and went for it. The thinking here was that the rca is mounted to the circuit board with no support so to reduce stress the 259 will mount to the back. Well overly long story short after mod I have now lost the audio to the speaker but not the headphone jack. I'll update someday but right now CB stuff keeps me busy. If anyone is interested I can post schematics.
Trashing my TenTec 1254
-
barefoothank
- Donor
- Posts: 218
- Joined: Jul 23 2014, 10:33
- Real Name: Henry
- Antenna: lil will,A99
- Radio: trc-485, 959,979
Trashing my TenTec 1254
587, a nudder mudder
-
Slyguy
- Wordwide & Qualified
- Posts: 3,691
- Joined: Oct 03 2010, 21:23
- Real Name: Sly
- Antenna: Yes
- Radio: Kenwood, Yaesu, Icom
- Contact:
Post the schematics. I'd like to take a look
Slyguy
Zero Six Three
Sherman Texas
Official Moderator - CBRT Complaints Department
We encourage all users to support our sponsors. We believe our sponsors are the best out there.
Be sure to tell them you saw their name on CBRadioTalk.
Support our fine sponsors!
Zero Six Three
Sherman Texas
Official Moderator - CBRT Complaints Department
We encourage all users to support our sponsors. We believe our sponsors are the best out there.
Be sure to tell them you saw their name on CBRadioTalk.
Support our fine sponsors!
-
barefoothank
- Donor
- Posts: 218
- Joined: Jul 23 2014, 10:33
- Real Name: Henry
- Antenna: lil will,A99
- Radio: trc-485, 959,979
I scanned them* but they are not as pretty as ten tec's so I will post their link to pdf.Slyguy wrote:Post the schematics. I'd like to take a look
Let me know if link is bad and I will go ahead and upload.
http://www.tentec.com/pages/R ... loads.html
*had to fold in half to fit scanner
587, a nudder mudder
