Dead Key Mod on Galaxy DX 2517
Dead Key Mod on Galaxy DX 2517
Ok, as the topic says, I gata lower my dead key on the Galaxy DX 2517.
I have been to CB Tricks and I have all the PCB diagrams and mod sheets but nothing directly says this is the control on the dead key.
Any help would be apreciated.
I have been to CB Tricks and I have all the PCB diagrams and mod sheets but nothing directly says this is the control on the dead key.
Any help would be apreciated.
Here's what I have on your model, adjust the Low power(VR18)
DX 2517 Adjustments
1. VR 1....AM/FM S-Meter
2. VR 2....SSB S-Meter
3. VR 3....SSB Squelch Range
4. VR 4....AM/FM Squelch Range
5. VR 5....FM Deviation
6. VR 6....SSB Carrier Balance
7. VR 7....TX Offset
8. VR 8....CW Beep Level
9. VR 9....RF Meter
10. VR10...Final Bias
11. VR11...Final Bias
12. VR12...Driver Bias
13. VR13...SSB ALC
14. VR14...AM/FM High Power
15. VR15...AM Modulation Meter
16. VR16...AM Modulation
17. VR17...SSB Power
18. VR18...AM/FM Low Power
19. VR601..13.8 Volt Power Supply
DX 2517 Adjustments
1. VR 1....AM/FM S-Meter
2. VR 2....SSB S-Meter
3. VR 3....SSB Squelch Range
4. VR 4....AM/FM Squelch Range
5. VR 5....FM Deviation
6. VR 6....SSB Carrier Balance
7. VR 7....TX Offset
8. VR 8....CW Beep Level
9. VR 9....RF Meter
10. VR10...Final Bias
11. VR11...Final Bias
12. VR12...Driver Bias
13. VR13...SSB ALC
14. VR14...AM/FM High Power
15. VR15...AM Modulation Meter
16. VR16...AM Modulation
17. VR17...SSB Power
18. VR18...AM/FM Low Power
19. VR601..13.8 Volt Power Supply