Get a better experience by installing our free app!
Not now
Get a better experience by installing our web app!
Hide
How to do it?
In Safari, tap on the menu bar. Scroll down the list of options, then tap Add to Home Screen.(If you don’t see Add to Home Screen, you can add it. Scroll down to the bottom of the list, tap Edit Actions, then tap Add to Home Screen.)
Connect with CB radio enthusiasts at CB Radio Talk Forum. Fuel your knowledge, unlock secrets, and engage in discussions. Join a vibrant community of like-minded individuals and explore the exciting realm of CB radios.
Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Disable your ad blocker to continue using our website.
Purchased and installed a new radio a couple weeks ago. Got it setup and working well. Ranger 2995DXCF model. Hooked in my MFJ-299 mic and everyone says I have a sweet sounding radio. I find it to be a good receiver, sensitive and brings in long distance contacts better than my Galaxy does. Adds a nice element to the radio room.
I did notice that when you set the squelch to just block out the white noise you can hear the fans through the speakers. I put my head phones on and it sounded like a twin engine turbo prop jet. These radios now come with the fan package installed and plugged into a 12 volt connection in the back of the radio. I rewired the fans to run from another 12 volt source and the fan noise from the radio disappeared. Cool.
Overall I like the radio and its capabilities. Nothing compared to a nice HF rig but I find it adequate and fun to use.
Good to hear you got one, they were hard to come by. I was wondering about the "CF", looked it up and it's "comes with fan", interesting and I wouldn't get one without it. I am curious as to which amp board is coming in the new ones, hopefully they are still using the dual 2290's but I think they have the mosfet board in the new models now. If you could snap a pic of where you made the new connction for the fan so others can see.
i just bought one, waiting for it to arrive, I have an old 2995dx but the amp board went poof "mosfets" , trying to get it fixed and will prolly sell the old one.
Browning Golden Eagle Mark IVA - Mark III & Mark II "LISTEN FOR THE PING"
Kenwood TS-590S - Yaesu FT897D - Kenwood TS-870 - Icom IC-7300
Yaesu FT-101E - Tram D201A - President Lincoln - CP2000
Gizmotchy G-31 Beam Super Penetrator 500 5/8 Wave
Comet GP9 2 meter/440 "North East Corner Of Massachusetts 613" CBRT 18204
dirtyjob wrote:i just bought one, waiting for it to arrive, I have an old 2995dx but the amp board went poof "mosfets" , trying to get it fixed and will prolly sell the old one.
All I did was cut off the phono plug adapter and add some wire to hook into my DC power block to receive the power from my Pyramid power supply. Nothing real technical. Just wanted to get the sound of the fans out of the receive on the radio. Picture file to large to upload.
I think there is a second 12v tap on the switching supply that would work for the fan and could add a few ferrite beads on the leads. Could you do me a favor and look in the manual for the amp board part number, would like to see if they made any changes, thanks.
These radios now come with the fan package installed and plugged into a 12 volt connection in the back of the radio. I rewired the fans to run from another 12 volt source and the fan noise from the radio disappeared. Cool.
