RF Limited Xtreme 2018 mic to 2970n2 radio

[LightFoot]

Happy Holidays. As the title says I'm trying to look for the correct wiring combination from the RF Limited Xtreme 2018 mic to the RCI 2970n2 radio.
Wiring code for the mic goes like this.
black Ptt Common ground
shield Ground
Red Microphone audio output
White Ptt Transmit
Blue Ptt Receive

Ranger RCI 2970N2 mic wiring on Radio goes like this.

1 Ground Shield
2 Audio
3Transmit
4 Receive
5 Ch Up
6 Ch down.

Can you help by looking at wiring diagram of mic and radio the correct combo. I need the color to pin number wiring. Just want to make sure i have this done correctly. Thanks....

[MDYoungblood]

It looks like you did most of the work. On the plug you can forget pins 5 and 6 since they are not used as the extreme doesn't have up/down controls. It looks by what you wrote the pinout would be;
1 - shield and black/ground
2 - red/audio
3 - white/TX
4 - blue/RX
5 - n/c
6 - n/c
Good luck on the wiring and Merry Christmas.

3's

Greg

[LightFoot]

MDYoungblood,Thank you soo much. I will perform this procedure on Thursday. Really appreciate the help. Love this site. Best regards and the warmest of wishes....

[MDYoungblood]

I looked up the mic and the wiring was on CB Tricks, pretty sure the way I wrote it is right.

3's

Greg

[jon6667]

hang on to that microphone. i have seen them on ebay for 100.00 crazy people