Mobile antenna corrosion

This forum provides help with antenna installation, as well as guidance on selecting the right antenna for your radio or mobile setup.
Post Reply
User avatar
eyecue
4 PILL USER
4 PILL USER
Posts: 29
Joined: February 1st, 2019, 1:16 pm
Handle: eyecue
Real Name: Brad
Antenna: sirio
Radio: Uniden, SBE, Motorola, GE, Connex, RCI
Contact:

Mobile antenna corrosion

#401747

Post by eyecue »

I am doing antenna maintenance on my mobiles and found corrosion after 1 winter. Could mag chloride be a contributor? Any tips on cleaner, sealer etc? SWR was flat and now it is climbing.
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,809
Joined: June 12th, 2010, 8:05 pm
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: Mobile antenna corrosion

#401748

Post by MDYoungblood »

eyecue wrote: April 7th, 2020, 6:40 pm I am doing antenna maintenance on my mobiles and found corrosion after 1 winter. Could mag chloride be a contributor? Any tips on cleaner, sealer etc? SWR was flat and now it is climbing.
What antenna are you using? Makes it easier to suggest a fix.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
eyecue
4 PILL USER
4 PILL USER
Posts: 29
Joined: February 1st, 2019, 1:16 pm
Handle: eyecue
Real Name: Brad
Antenna: sirio
Radio: Uniden, SBE, Motorola, GE, Connex, RCI
Contact:

Re: Mobile antenna corrosion

#401753

Post by eyecue »

I have several that are older units with no name on them. They have light corrosion but the newer one is a cheap Chinese model with galvanized bolts and they are showing white crystal accumulations and rust. Probably going to change the hardware to stainless steel. Just wondered if anyone had a go to coating like never seize etc.
User avatar
Gunner357
Donor
Donor
Posts: 332
Joined: July 5th, 2020, 6:36 pm
Handle: Gunner357
Real Name: Rick
Call Sign: KE8PSI
Antenna: Preditor 10k, V58 Maco base,EFHW-8010 end fed
Radio: Yaesu FT920,Galaxy 88hl, Galaxy 99v, Cobra148gtl modded, Cobra 29ltd chrome
Contact:

Re: Mobile antenna corrosion

#402692

Post by Gunner357 »

I have a corrosion problem also On my P10k it pulled the threads on the lower shaft and mount. I'm going to use dielectric grease on the threads I use fluid film on a towel and wipe the outside down helps to protect it
Yaesu FT920 (KE8PSI)
Galaxy88hl
Galaxy 99v
Cobra148 GTL w/ channel expansion
Cobra 29ltd Chrome
Magnaforce 350
Predator 10k
V58 Maco
Homemade Dipole base antenna
EFHW-8010 Multi-band End Fed Half Wave Antenna
Post Reply