Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
Cobra 25 ltd
-
smoke blower
- Skipshooter
- Posts: 420
- Joined: June 26th, 2011, 6:05 pm
- Age: 49
- 11
Cobra 25 ltd
Need help I have no power at the channel selector on this cobra 25 ltd classic channel selector has no read out
Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
Follow @cbradiotalk
Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
-
MDYoungblood
Verified - Site Admin
- Posts: 10,421
- Joined: June 12th, 2010, 8:05 pm
- Age: 70
- 12
Check the connectors going to the display, could just be dirty. It is an old radio and the digits may have deteriorated, it happens.
3’s
Greg
Follow @cbradiotalk
3’s
Greg
-
smoke blower
- Skipshooter
- Posts: 420
- Joined: June 26th, 2011, 6:05 pm
- Age: 49
- 11
Thank you I finally got the channel selector straight now my issue is the audio chip gets very very hot and low receive audio I have replaced quite a few caps around the audio chip but no luck . The final was blown as well when I received the radio I just can't find what is wrong
Follow @cbradiotalk
