Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
Cobra 25 ltd
-
smoke blower
- Donor
- Posts: 424
- Joined: June 26th, 2011, 6:05 pm
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Cobra 25 ltd
Need help I have no power at the channel selector on this cobra 25 ltd classic channel selector has no read out
Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
-
MDYoungblood
Verified - Site Admin
- Posts: 10,809
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Cobra 25 ltd
Check the connectors going to the display, could just be dirty. It is an old radio and the digits may have deteriorated, it happens.
3’s
Greg
3’s
Greg
-
smoke blower
- Donor
- Posts: 424
- Joined: June 26th, 2011, 6:05 pm
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Re: Cobra 25 ltd
Thank you I finally got the channel selector straight now my issue is the audio chip gets very very hot and low receive audio I have replaced quite a few caps around the audio chip but no luck . The final was blown as well when I received the radio I just can't find what is wrong
