Cobra 25 ltd

Have some other technical questions can't find the answer for? Come in and ask them here.
Post Reply Previous topicNext topic
User avatar
smoke blower
Skipshooter
Skipshooter
Posts: 420
Joined: June 26th, 2011, 6:05 pm
Age: 49
11

Cobra 25 ltd

#409114

Post by smoke blower »

Need help I have no power at the channel selector on this cobra 25 ltd classic channel selector has no read out


Post Merge Complete

Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them







Donate to CBRT
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,427
Joined: June 12th, 2010, 8:05 pm
Age: 70
12

#409150

Post by MDYoungblood »

Check the connectors going to the display, could just be dirty. It is an old radio and the digits may have deteriorated, it happens.

3’s

Greg






"321, NW South Carolina"

Official Moderator - CBRT Complaint Department

Donate to CBRT
User avatar
smoke blower
Skipshooter
Skipshooter
Posts: 420
Joined: June 26th, 2011, 6:05 pm
Age: 49
11

#409154

Post by smoke blower »

Thank you I finally got the channel selector straight now my issue is the audio chip gets very very hot and low receive audio I have replaced quite a few caps around the audio chip but no luck . The final was blown as well when I received the radio I just can't find what is wrong







Donate to CBRT
Post Reply Previous topicNext topic