Need help - remove front panel/cover from TRC-216 hand-held

a place to talk about and ask for help for them shortwave radio's & Scanners.
Post Reply Previous topicNext topic
User avatar
wb0gaz
NEW DUCK
NEW DUCK
Posts: 0
Joined: December 6th, 2021, 3:32 pm
Age: 95

Need help - remove front panel/cover from TRC-216 hand-held

#408406

Post by wb0gaz »

Looking for help - more of a repair type question.

I have a Realistic TRC-216 hand-held and I need to remove the front panel from the body so I can get at (and remove) the PC boards inside. The rear cover (which includes the AA-cell battery holder) is easily removed (three screws) but the front cover/face has no visible fasteners.

If you know where I could go for advice on this (or can suggest how to proceed), I'd appreciate any advice.

Thanks!







Donate to CBRT
User avatar
443 Arizona
Wordwide & Qualified
Wordwide & Qualified
Posts: 847
Joined: April 29th, 2010, 2:22 pm
Age: 65
12

#409258

Post by 443 Arizona »

everything comes apart from the back side, in layers. your going to end up with a total teardown .







Donate to CBRT
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,523
Joined: June 12th, 2010, 8:05 pm
Age: 70
12

#409269

Post by MDYoungblood »

443 is right, everything is accessed through the back.

3’s

Greg






"321, NW South Carolina"

Official Moderator - CBRT Complaint Department

Donate to CBRT
Post Reply Previous topicNext topic