Astatic D-104 Pushrods

[Blue Ox2]

Howdy Folk!

I am interested to know if anyone has attempted to 3D print the pushrod from inside the D-104 Mic.
It is part # 41510-00-00 and if someone can come up with the exact measurements for a pushrod that isn't warped or worn down too much.

Could be an exciting adventure.

73,

LQQkin' to hear more from y'all soon.

---

Post Merge Complete

Added 4 days 15 hours 45 minutes 32 seconds after previous.
found the pushrod for D-104 on e-bay. Thanks

[MDYoungblood]

Might try Trapper267, he’s doing repairs on the side, might have one apart. I did replace one years ago using an acrylic rod I purchased at a local craft store, measured the diameter but don’t remember the size now.

3’s

Greg

[Blue Ox2]

Thanks Greg.

I found one currently on E-bay and the "K" Eagle has a TUP9 base the pushrod is the same.

73,

Mike