Stryker SR-447HPC2 Windows 10 Issue
-
LEV
- NEW DUCK
- Posts: 0
- Joined: Oct 22 2022, 12:30
- Handle: FJCruiser
- Real Name: Larry
- Contact:
Stryker SR-447HPC2 Windows 10 Issue
I'm hoping someone can help me connect my radio to the PC. I can't find a Windows driver for Windows 10 or 11 that'll work with the 447 software. Has anyone else had this problem? Strykers website is not helpful. The Driver that they supply on their website does not work. HELP!!
-
jessejamesdallas
- Donor
- Posts: 6,287
- Joined: Oct 10 2004, 19:02
- Handle: Jesse James Dallas
- Real Name: Jesse
- Radio: working
- Contact:
Re: Stryker SR-447HPC2 Windows 10 Issue
What are you trying to do? Shoot skip on facebook??? 
Do not argue with an idiot. He will drag you down to his level and beat you with experience.
-
LEV
- NEW DUCK
- Posts: 0
- Joined: Oct 22 2022, 12:30
- Handle: FJCruiser
- Real Name: Larry
- Contact:
Re: Stryker SR-447HPC2 Windows 10 Issue
Not sure what you mean" Shoot skip on facebook???". I have a Roger beep on the radio now that I need to get rid of. The only way is to log in through the software, but can't get it to work on Windows 10.
-
jessejamesdallas
- Donor
- Posts: 6,287
- Joined: Oct 10 2004, 19:02
- Handle: Jesse James Dallas
- Real Name: Jesse
- Radio: working
- Contact:
Re: Stryker SR-447HPC2 Windows 10 Issue
what are you wanting it to do with windows?LEV wrote: Oct 23 2022, 15:30 Not sure what you mean" Shoot skip on facebook???". I have a Roger beep on the radio now that I need to get rid of. The only way is to log in through the software, but can't get it to work on Windows 10.
Do not argue with an idiot. He will drag you down to his level and beat you with experience.
-
LEV
- NEW DUCK
- Posts: 0
- Joined: Oct 22 2022, 12:30
- Handle: FJCruiser
- Real Name: Larry
- Contact:
Re: Stryker SR-447HPC2 Windows 10 Issue
Stryker has software to access the SR447. That's how you can make changes to the radio, using the software, including turning on/off the roger beep. There is no manual setting on that radio. Unfortunately the driver that Stryker recommends for Windows 10 on their website, does not work for me. I was hoping someone had a workaround or some knowledge that could allow me to use the software.
-
MDYoungblood
- Site Admin
- Posts: 10,803
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Stryker SR-447HPC2 Windows 10 Issue
Windows 10 has a way to revert to windows 7 so you can run certain programs. Go to windows 10 support or try the “help” tab. Out of curiosity I downloaded the 447 program to my Win10 PC, installed it with no problem but I’m not sure it is working because I don’t have a radio or control cable. I will say it is different than the 955 program I have used in the past.
3’s
Greg
3’s
Greg
-
LEV
- NEW DUCK
- Posts: 0
- Joined: Oct 22 2022, 12:30
- Handle: FJCruiser
- Real Name: Larry
- Contact:
Re: Stryker SR-447HPC2 Windows 10 Issue
Thanks! I was able to load the program too, but could get no connection to the radio because of the driver issue. I'll check into the Windows rollback. Thanks again.
-
MDYoungblood
- Site Admin
- Posts: 10,803
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Stryker SR-447HPC2 Windows 10 Issue
Your computer should give you a message that it “sees” the usb cable when it’s plugged in, if you don’t see it that could be the problem, I had that issue on a sdr dongle before.
3’s
Greg
3’s
Greg
