connex cx33hpc1

Need some help with a radio mod? Pop in and ask away.
Post Reply Previous topicNext topic
User avatar
K1zxx
Donor
Donor
Posts: 3
Joined: November 25th, 2022, 3:48 pm
Age: 56

connex cx33hpc1

#409806

Post by K1zxx »

hello, does anyone have information on the conversion to 11mtrs on the Connex CX33hpc1 ?

the proper way not the one that doesn't work. :-D







Donate to CBRT
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,565
Joined: June 12th, 2010, 8:05 pm
Age: 71
12

#409807

Post by MDYoungblood »

Remove the speaker side cover to expose the circuit board components. With the knobs to you in the front center of the board is a jumper array of 6 pins, (2 rows of 3 pins). Move the jumper to the back 2 pins, center and right leaving a pin exposed to its left. Take should do it.

3’s

Greg


Post Merge Complete

Added 5 days 1 hour 13 minutes 54 seconds after previous.
???? Did it work, curious mines want to know!

3’s

Greg






"321, Homeless at the moment, lol"

Official Moderator - CBRT Complaint Department

Donate to CBRT
User avatar
K1zxx
Donor
Donor
Posts: 3
Joined: November 25th, 2022, 3:48 pm
Age: 56

#409826

Post by K1zxx »

thanks for the help 1st of all, it was a beast but I got it, for some reason the 4 times I tried it the radio would not take, it would receive on 11 but would not tx, so I cycled the power several times and said I will give it one more try, so I took the pin plug out and reset it into the specs you sent and whooola it works and works well, I am not sure why it didn't work the 1st 3 times, maybe I may have reversed the pin plug or needed to cycle the power fully disconnecting it from the power source.







Donate to CBRT
User avatar
MDYoungblood
Verified
Site Admin
Site Admin
Posts: 10,565
Joined: June 12th, 2010, 8:05 pm
Age: 71
12

#409828

Post by MDYoungblood »

Glad you got it working, I hear it is a nice radio with excellent receive. A word to the wise, you should always remove any radio from a power source before touching any inside components unless you are using non metallic tools.

3’s

Greg






"321, Homeless at the moment, lol"

Official Moderator - CBRT Complaint Department

Donate to CBRT
Post Reply Previous topicNext topic