This forum is a valuable resource for microphone information, including wiring details and more. If you need assistance with choosing a high-quality microphone for your radio, feel free to ask here.
- NEW DUCK
- Posts: 0
- Joined: January 15th, 2023, 5:52 am
- Age: 61
Does anybody have a wiring diagram for a Turner plus 2 wired to a Kenwood TS 440s 8 Pin thank you
- Posts: 766
- Joined: June 14th, 2009, 7:46 pm
- Age: 58
I found this and I'm going to copy it just as it says on paper. Quite a few years ago, I had a Turner and a 575-M6 hand held mic. I had them both wired to my Elecraft K3. Come to find out, once it was wired, it worked on my Kenwood TS-590S, My Alinco DR-235 mobile and my ADI-146 mobile. The tech at the shop gave me this and it was buried on the shelf. Hope this helps. I just copied exactly what the tech wrote down. The Turner mic worked well but didn't sound as good as the 575-M6 hand mic. I prefer more wide rage audio but that is my preference. I am assuming the numbers are like looking at numbers on a clock. Hope this helps.
RED & BLACK PTT
WHITE > AUDIO
2 PTT >RED WIRE
7,8 GROUND> BLACK WIRE
1 AUDIO > WHITE AUDIO
Post Merge Complete
Added 4 minutes 1 second after previous.
Welcome to the Forum.