Radio Mod for K3?
-
De_Wildfire
- Donor
- Posts: 934
- Joined: Jun 14 2009, 19:46
- Handle: De_Wildfire
- Real Name: Greg
- Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
- Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
- Contact:
Radio Mod for K3?
Marv, Is there a way to increase the power limits on the Elecraft K3 and tap into the service menu? The output restricts the radio to 12 watts on 11 meters after the company sent me a link to click on the firmware that opened up my radio for all the bands including 11 meters after producing my MARS license. They restricted it to 12 watts only on that band. There has to be a service menu either by hooking a pc up to it or a secret service menu by pushing certain buttons. There is not a physical mod that can be done. Does anyone else know a back door into the power limits?
-
MDYoungblood
Verified - Site Admin
- Posts: 10,805
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Radio Mod for K3?
I doubt if Marv has an answer for that one. If my memory is correct I think the K3 has 2 PA boards inside, one is the main 100w board and the other is basically for the tuning section which is roughly 10 to 12w. I'll bet the sneaky tech's at Elecraft has the firmware programmed to us that board for 11m. Keep us informed on what you find.
3's
Greg
3's
Greg
-
De_Wildfire
- Donor
- Posts: 934
- Joined: Jun 14 2009, 19:46
- Handle: De_Wildfire
- Real Name: Greg
- Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
- Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
- Contact:
Re: Radio Mod for K3?
Interesting. Never thought about that. Thanks! Will let you know what I uncover.
