Standby Switch on solid state amplifier

[Sidewinder]

Hello all. I recently obtained a Davemade 2X12 amplifier that is equipped with a preamp and ssb switch. I noticed that on this particular amp there is also a standby switch. I had never seen a standby switch on any solid state amp, and wanted to know what the purpose was on this one. The only amps I have ever seen with standby had been tube amps up to this point. I was wondering if maybe the standby acted as a glorified mute switch, or if it bypasses the amp when engaged. Any information would be appreciated. Cheers!

[Sidewinder]

[MDYoungblood]

Basically it turns off the transmit sensing circuit so the relays don't key. It could be as simple as opening a wire on the relay to relay a more complicated relay to the same circuit.

3's

Greg

[Sidewinder]

Thanks for the info! I really appreciate it. Kinda figured it was something like that, but it is always good to have confirmation:)

73!

[MDYoungblood]

Each builder has their own critique, I also think that the pre amp can still be used in bypass (Standby) mode.

3's

Greg