CBRT has been

New Hex Beam UP!!!

This forum is for general discussions, and you are welcome to post in this forum if you are not able to find the right place.
Image
Post Reply
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

New Hex Beam UP!!!

#410209

Post by De_Wildfire »

Well, we recently put up a new Hex Beam from K4KIO. All I can say that it is amazing from 20-6 meters with a flat SWR except on six with a 1.3 SWR. For 11 meters, the tuner doesn't even break out a sweat to bring it down a little. On 10 meters, I've made contact with all of Europe, a few African countries, many stations in Russia, all of south America, Canada, Hawaii, Alaska, Western Canada, Eastern Canada, Japan, New Zealand, Mexico, the West Indies. On 20 meters, I chatted with two Antarctica research bases and all over the world but 20 meters behaves a little differently.

This is the fun part, there were many stateside stations across the country that I run five watts and have no problem holding a QSO. There were a few stations on 10 meters in Europe and South America where I was running five watts also, but for the most part, 100 watts is no problem working the world on 10/11 meters. Since I put up the Hex Beam, I no longer use the amplifier.

It's taking the storms very well so far and the most wind we've had is about 45 mph with a higher wind gusts. The rotator and box is the Yaesu G-450A mounted at the bottom with a tilt down pole. The height is around 28 feet. It can't be seen from the street and it is painted black. The pole matches the color of the house. The last time I had this much fun was back in 1978-1984 when I was running a PDL-2 on 11 meters working the same countries.

I didn't take down the IMAX 2000 so I could talk locally and also to listen in all directions at time. Yes, I miss the PDL2 and that was great in it's day but now I'm having loads of fun working the world on the Hex Beam. This is the really cool part. A local friend in the area likes to work the same stations as me with 100 watts so he always asks them who is stronger. He has a five element monobander on a 75 foot tower. So far, every time the stations always say our signals are the same! The Hex beam is worth every dime. Now I have to see how it survives more storms.
User avatar
jessejamesdallas
Wordwide & Qualified
Wordwide & Qualified
Posts: 6,287
Joined: Oct 10 2004, 19:02
Handle: Jesse James Dallas
Real Name: Jesse
Radio: working
Contact:

Re: New Hex Beam UP!!!

#410217

Post by jessejamesdallas »

pic's?
Image
Image
Do not argue with an idiot. He will drag you down to his level and beat you with experience.
User avatar
Bozo
Owner
Owner
Posts: 9,448
Joined: Aug 31 2004, 13:06
Handle: Bozo The Clown
Real Name: James Wadsworth
Antenna: Monkey Made MM9
Radio: General Lee Radio
Contact:

Re: New Hex Beam UP!!!

#410218

Post by Bozo »

:text-worthless: :text-goodpost:
Image

Donate here


User avatar
MDYoungblood
Site Admin
Site Admin
Posts: 10,808
Joined: Jun 12 2010, 20:05
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: New Hex Beam UP!!!

#410230

Post by MDYoungblood »

I’ve been looking at that antenna myself, I would probably stretch the 10m a tad to bring it closer to the 11m band since I never use the 29th portion on 10m. Did you install the “ice kit”, if not it is worth looking into. I have also read the 6m will tune most of the 2m band, I would check it with an analyzer.
I will most likely be next year before even thinking of a beam so keep us informed of any problems that might come along.

3’s

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#410397

Post by De_Wildfire »

Sorry, here is the pic. Thanks Bozo!
Stealth Hex.jpg



Post Merge Complete

Added 17 minutes 34 seconds after previous.
MDYoungblood,

No, I didn't install any ice kits. The weather here has changed and we always get rain when everyone else get snow. We haven't seen ice for the last two years. With these storms, especially lately, the beam has been holding up well. I run a manual tuner on two meters and it works well. I need to bring up the VHF real time propagation maps up and try more long distance contacts. I will let you know how the beam hold up. I am tempted to get the Buddi Hex, a portable Hex Beam for Field Day because launching dipoles with a air cannon into the trees becomes old with along with misfiring.
You do not have the required permissions to view the files attached to this post.
User avatar
jessejamesdallas
Wordwide & Qualified
Wordwide & Qualified
Posts: 6,287
Joined: Oct 10 2004, 19:02
Handle: Jesse James Dallas
Real Name: Jesse
Radio: working
Contact:

Re: New Hex Beam UP!!!

#410403

Post by jessejamesdallas »

still trying to figure out how to mount mine on a pole.... :confusion-scratchheadyellow:

Image
Image
Image
Do not argue with an idiot. He will drag you down to his level and beat you with experience.
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#410441

Post by De_Wildfire »

I have custom made clamps to the side of the house that hold the pole. I did have other ideas before that by buying one of those Amish made heavy duty picnic tables and putting the pole right down the center where the umbrella goes. Hex Beams by design don't need to be real high to get out. I happen to talk to the owner of the BUDDY HEX on the air and he is making a prototype flipped the other way and disguising it as an umbrella for the beach. I actually heard him talk to Europe on another prototype from his bicycle. I think I was on 10 meters or one of the upper bands when I heard his QSO.


Post Merge Complete

Added 10 minutes 48 seconds after previous.
Here's website for the buddiHEX, the portable Hex Beam, not base version which is in the pic above.

MODBREAK_HEADBozo

non sponsor buddipole link removed



Post Merge Complete

Added 2 minutes 5 seconds after previous.
Just click on the info in the box above and it should go to the website.
User avatar
Stoneman
Skipshooter
Skipshooter
Posts: 346
Joined: Nov 02 2006, 15:47
Handle: Stoneman
Real Name: Junior
Antenna: One Shot Dipole
Radio: Cobra 2000 GTL
Contact:

Re: New Hex Beam UP!!!

#410442

Post by Stoneman »

Ain't those Antenna's like 7-8 hundred bucks??
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#411390

Post by De_Wildfire »

They are pricey but you can order them with one band like 10 meters and throw a tuner on it. It works well. I don't know if the owner K4KIO ships the wire cut for 11 meters. He was very nice on the phone and I was comfortable ordering from him.

MODBREAK_HEADBozo

Link Removed - Non Sponsor
User avatar
MDYoungblood
Site Admin
Site Admin
Posts: 10,808
Joined: Jun 12 2010, 20:05
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: New Hex Beam UP!!!

#411419

Post by MDYoungblood »

I think you can stretch the 10m wire at the insulator to tune at 28.0mhz and that should let you go down to 27mhz and still be in a good SWR range but I'd still have the tuner. I rarely go up to 29mhz, most do vertical there for the repeaters. Does yours have the 6m wire? I have read that it tunes well on 2m, might want to check that out.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#411431

Post by De_Wildfire »

The Hex beam will tune down to 11 meters with a tuner with no problem from 10 meters. It does have six meter wire on it and it tunes a 1.3 . The other bands it will tune a 1.1 without a tuner. I have tried a manual VHF MFJ tuner on the Hex beam and it does tune in case I want to run two meter SSB in which they all use horizontal on the lower portion of two meters. I mainly use my verticals on two meter FM and spend more time there.
User avatar
tibadoe
Donor
Donor
Posts: 6
Joined: Sep 25 2021, 20:03
Handle: Zip Tie
Real Name: Joe
Call Sign: K4JLT
Antenna: Sirio 2016, Solarcon iMax 2000 w/GPK & A-99
Radio: President George, McKinley, Radioddity QT60, & Galaxy DX2547
Contact:

Re: New Hex Beam UP!!!

#411434

Post by tibadoe »

A little late buy congrats on your Hex Beam. I put mine up last year but went with the k4hex beam. Came with all the bands and includes shipping!
----
Joe
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#411438

Post by De_Wildfire »

Joe, that is great! I guess you are working those rare dx stations on SSB that show up on DX Summit. What a difference compared to the dipole or vertical. I guess it's each individual's preference. These last three weekends storms of 50+ mph plus winds, the Hex is still holding up. It has been up since February of 2023. I heard K4KEX is another good company too. There is a station in Columbia, SA I chat with all the time and his has been up over 20 years. Which rotator do you have?
User avatar
tibadoe
Donor
Donor
Posts: 6
Joined: Sep 25 2021, 20:03
Handle: Zip Tie
Real Name: Joe
Call Sign: K4JLT
Antenna: Sirio 2016, Solarcon iMax 2000 w/GPK & A-99
Radio: President George, McKinley, Radioddity QT60, & Galaxy DX2547
Contact:

Re: New Hex Beam UP!!!

#411441

Post by tibadoe »

Glad the HB is handling the winds. I remember when I first put up the antenna, I keep an eye on it during every storm. Now days when the winds blow, I don't think twice. I am also using the Yaesu G-450A.
----
Joe
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#411443

Post by De_Wildfire »

That is a great rotator. I like the G-450 better than the CDE Ham 2 rotator and box back in the day with my old PDL2 quad. It is easier to read when pointing at different countries and I like the red light that comes on at the north.


Post Merge Complete

Added 1 month 6 days 9 hours 42 minutes 41 seconds after previous.
Today I put an antenna analyzer on the Hex Beam and got great results. I mentioned earlier that I used the turner. Now I guess that is why it tuned so well. Lol. I didn't know I had the two meter band on it. It must be utilizing the six meter wires. So the 1.0 SWR was resonant on 146.660. The range spread out on the whole two meter band was 1.0-1.3. I know the Hex is horizontal but I wanted to see how effective it was listing to a repeater 45 miles away. It was coming in not as strong as the vertical but what I wanted to do is move the beam a couple of degrees off and check the signal drop off. Sure enough, when I moved it a couple degrees, I didn't hear the repeater anymore. Horizontal is only used on two meter SSB on the lower part of the band so this will come in handy when there are temperature inversions or the two meter skip rolls in.


Post Merge Complete

Added 1 day 5 hours 34 minutes 24 seconds after previous.
Today was the best day for the Hex Beam since I got it. Normally, I can throw a tuner on it and work all kind of skip on channel 38 LSB on my Uniden Washington. That is a given. But today, was a doozy and I mean a doozy. My furthest and first contacts during the peaking of solar cycle 25. I was on 10 meters at sunset and worked two stations in Japan and a South Korean station. They all spoke good English. We actually had a good QSO. I am sure that if you are a free bander outside the regular 40 channels, you could probably call CQ and run into a rare DX station since 10 and 11 meters have similarities. I almost fell out of my chair today with all this excitement. I could kick myself for not getting the hex beam sooner decades ago.
User avatar
MDYoungblood
Site Admin
Site Admin
Posts: 10,808
Joined: Jun 12 2010, 20:05
Handle: MDYoungblood
Real Name: Gregory
Antenna: HyGain AV-6160
Radio: Icom IC-746 (non pro)
Contact:

Re: New Hex Beam UP!!!

#411689

Post by MDYoungblood »

Wow, I did ask you about 2m on the 6m wire , I had only read it could be done and 2m SSB is fun, some of my Baltimore friends do SSB, 144.100 MHz to 144.275 MHz USB.
Looks like I'll be in the market for a hex.

3's

Greg
"321, West Manchester Township, PA"

Official Moderator - CBRT Complaint Department
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#411693

Post by De_Wildfire »

Right now I am having too much fun down on HF but I will be on two meter SSB testing the HB when the temperature inversions start rolling in towards the Spring. I will listen out on 144.100 to 144.275. I guess I can take down my home made horizontal loop in the attic now.
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#411735

Post by De_Wildfire »

Update on the Hex Beam. Last weekend I used the Hex Beam on the 10 meter band and logged 250 countries in a day. I am sure 11 meters was also open on the 40 SSB and also on the free band. This solar cycle is great near the top for all the DX. For a small foot print and confined space, the Hex Beam is the way to go. It is easy to hide and doesn't have to be high to grab the Dx.
User avatar
De_Wildfire
Donor
Donor
Posts: 940
Joined: Jun 14 2009, 19:46
Handle: De_Wildfire
Real Name: Greg
Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
Contact:

Re: New Hex Beam UP!!!

#411977

Post by De_Wildfire »

Hex Beam Update:***** Made a good contact to 8255 in Phoenix, AZ on channel 38 LSB. Was running 12 watts from the Uniden Washington. She's working great on 11 meter SSB! The beam is taking the high winds very well with all the crazy storms around. The noise floor is lower on the beam compared to the iMAX 2000. I still use the iMAX 2000 vertical to talk to all the locals around here in the mobiles.
Post Reply