RCI 2950

[buzzyt517]

Is there talk back on these radios.

The one i saw had it on and i could not figure out how to turn it off.

Is there an on off swith. How

[bigboy250]

i have one and you need to just put off on switch. thats if you want talkback i put the diod back in place and i like it that way.

[buzzyt517]

So you think its just a soldered diode on the external speaker,pa plug ins


I checked for a diode soldered in somewhere around the conections (pa,ext sp) I could not find one. How eles can you add talk back.

[bigboy250]

no its on the board hold on let me see i have that mod in my mod book ikeep hang on look in radio and look for d-78 if the leg is cut just solder it back to board. any other mod you want for this i have a way to do it any just about anything else for any type of radio i have worked on always write down what i did and how i did it. if you need it i can scan it and send it to you in e-mail . just let me know.

[buzzyt517]

How about adjusting the dk ane peak on it. That would be nice to no.

Thanks For your help.

It already has TB i was woundering how you would get rid of it. You answer my q about that. Thanks

[BigBopper]

Owners manual

[Please login or register to view this link]

[buzzyt517]

Very nice thanks bopp. Any word on what the adjustments are for dk and peak power on am

[BigBopper]

AM POWER HIGH:Set RF PWR control on radio to maximum Put mode selector on AM. Mic Gain to minimum VR13

AM POWER LOW:Set RF PWR control on radio to minimum. Mic Gain to minimum VR15 Key transmitter with no modulation applied and adjust for 2W.

[buzzyt517]

There it is. Thank you bopper thats what i was wanting to know

Thanks Guys for all you help