SWP General Lee DK?
SWP General Lee DK?
Does anybody know off the top of their head what the dead key settings are on the SWP Gen Lee on Lo and on Hi when he sets em up for a amp? The reason i ask is my bro has a 1 and he just put my old EC 1x4 in his big Cornbinder gas haulin rig and when he has the power set on Lo on the radio and the amps variable set anywhere it sounds like **Censored** and if you turn the radio power up on HI it sounds awsome but am just wonderin if it is 2 much DK for the amp? It showed on my cheapo RATSHACK meter 2 be keyin like 4-500 and swingin to 7-800 with radio on HI...... With radio on LO it showed keyin like 1-200 i think i cant really remember exactly somewheres in there and swingin to like 7-800 which is what i think were lookin for but man does it sound horrible even with mic gain cut way way back almost off it just sounds trashy bad but you flip the power switch on the radio to HI and man SWEETNESS
so that is to high for the amp right? And what could be causing it to sound that way when on lo i cant figure it out we got it grounded good when i had it in da Blazer it didnt sound like that behind my Gen Lee? Now im runnin a DaveMade 1x4 same pill configuration just diffrent name and everybody says it sounds good on low when im sittin still or drivin slow just cause the truck has alot of noise in it but i can turn my power up to hi in my rig and it takes most of the background noise out so WTF is up with this?
Alrite i just checked the DK LO=1.5 HI=2.5 but get this sumpn aint rite with the radio on HI the amp is only swingin 550 now PEP and DK 400 PEP WTF is up with that the other nite it was swingin to 7-800 the box is rated at 1000 watts and i know that is at 15 volts so at the 14.3...... it should still do like 7-800 range rite?
- Mountaineer
- Donor
- Posts: 620
- Joined: Feb 04 2007, 19:44
- Contact: