How do I
- QuickSilver 112
- Duckplucker
- Posts: 141
- Joined: Feb 27 2007, 17:02
- Contact:
- QuickSilver 112
- Duckplucker
- Posts: 141
- Joined: Feb 27 2007, 17:02
- Contact:
- 316
- Wordwide & Qualified
- Posts: 1,462
- Joined: Jan 01 2007, 20:43
- Handle: 316
- Real Name: Skylar
- Antenna: Wilson 5K
- Radio: RCI 2950 and IC-7000
- Contact:
- 316
- Wordwide & Qualified
- Posts: 1,462
- Joined: Jan 01 2007, 20:43
- Handle: 316
- Real Name: Skylar
- Antenna: Wilson 5K
- Radio: RCI 2950 and IC-7000
- Contact:
- Road
- Donor
- Posts: 254
- Joined: Dec 25 2006, 18:33
- Contact:
I have a push-up 30' pole with a A99 on top went better that I expected.
I put a 2" pipe in the ground about 3' left it sticking up about 1' filled with sand to ground level. Used guy wires at 20' and 30' with turnbuckles to tighten the guys. Worked great the A99 is the only thing moving in the wind.
Road (667)
GAL 2:20
I put a 2" pipe in the ground about 3' left it sticking up about 1' filled with sand to ground level. Used guy wires at 20' and 30' with turnbuckles to tighten the guys. Worked great the A99 is the only thing moving in the wind.
Road (667)
GAL 2:20
- 316
- Wordwide & Qualified
- Posts: 1,462
- Joined: Jan 01 2007, 20:43
- Handle: 316
- Real Name: Skylar
- Antenna: Wilson 5K
- Radio: RCI 2950 and IC-7000
- Contact:
- drdx
- Donor
- Posts: 5,944
- Joined: Apr 25 2007, 12:32
- Handle: dollar-98
- Real Name: David
- Antenna: Many
- Radio: Many-
- Contact:
Hello there. I'm late on this one, but in the past, I've driven 5'masts in the ground next to each tower leg, leaving 18 in or so sticking up and used mast-to-mast u-bolt clamps to secure the tower legs to the masts. I would only recomment doing this with the aid of the house for support, of course. -drdx
Yes it's me, Dollar-98, drdx, the original all maul, shot cawla on workin this no-fade technology.
-drdx
-drdx
- 316
- Wordwide & Qualified
- Posts: 1,462
- Joined: Jan 01 2007, 20:43
- Handle: 316
- Real Name: Skylar
- Antenna: Wilson 5K
- Radio: RCI 2950 and IC-7000
- Contact: