kenwood 520
- rev ike
- Wordwide & Qualified
- Posts: 616
- Joined: June 19th, 2007, 5:57 pm
- Contact:
kenwood 520
just got my grubby little hands on a kenwood ts 520 anyone know much about this unit .is it worth having ?are there any real potentials here or do i have some junk!
- 928bolo
- 6 PILL USER
- Posts: 76
- Joined: June 17th, 2007, 3:37 pm
- Contact:
- Bigpimp347 [UK]
- Donor
- Posts: 649
- Joined: December 12th, 2006, 8:48 am
- Handle: Worldwide 347
- Real Name: Mark
- Call Sign: M5ADU
- Antenna: big one
- Radio: lots and lots.
- Contact:
If it has 11mtrs 27mhz crystals inside then you have a very powerfull and great sounding rig for CB, and HF too..
old sets, but with valves have a very clean output and upto and sometime over 100w is easy..
one of my main questions is why spend $200 to $400 on a CB when you can buy quality amateur radios for the same or less..!!
I only use Kenwood amateur sets here on CB, and you can not get better than the best.!!
old sets, but with valves have a very clean output and upto and sometime over 100w is easy..
one of my main questions is why spend $200 to $400 on a CB when you can buy quality amateur radios for the same or less..!!
I only use Kenwood amateur sets here on CB, and you can not get better than the best.!!
I want to die asleep like my grandad did,
Unlike his passengers, Screaming and shouting.!!
Unlike his passengers, Screaming and shouting.!!
- DX47
- Skipshooter
- Posts: 230
- Joined: April 6th, 2007, 11:42 am
- Contact:
- busman
- Donor
- Posts: 2,097
- Joined: December 27th, 2006, 12:04 pm
- Contact:
- Spitfire 441
- 4 PILL USER
- Posts: 48
- Joined: July 26th, 2007, 10:58 am
Kenwood 520
I have a Kenwood 530. It is the same as the 520 inside. The only difference is 520 is analog frequency and 530 is digital. does 120 watts pep with two JAN 6146 tubes. Haven't used mine in a while, but I believe they go down to about 27.700 or so. So you could free band with it. No AM so you are done there. I do believe you can streach the oscillator down some by changing its reference crystal. Best to get a Good tech for that.
- Circuit Breaker
- Donor
- Posts: 1,665
- Joined: October 27th, 2006, 12:30 pm
- Handle: Circuit Breaker
- Real Name: Stephen
- Call Sign: K7CB
- Antenna: OCF Dipole
- Radio: HR2510/Yaesu FT-950
- Contact:
- Night Crawler
- Wordwide & Qualified
- Posts: 3,836
- Joined: May 15th, 2007, 9:03 am
- Contact:
Re: kenwood 520
I had a 520 SE a little bit newer but the same circuit if yourev ike wrote:just got my grubby little hands on a kenwood ts 520 anyone know much about this unit .is it worth having ?are there any real potentials here or do i have some junk!
want to modify it for 11 meters change crystals
36.895 to 35.895
37.395 to 36.395
37.995 to 36.995
It will give you coverage from 27.000 to 28.100
Thats all you have to do. Tune as normal no other mods needed.
If you want to go below 27.000 put in a 35.395 crystal.
Here is a link for the manual and schematic.
[Please login or register to view this link]
- FOAD911
- 2 PILL USER
- Posts: 15
- Joined: July 31st, 2007, 8:48 pm
Leave it alone
I have a Kenwood TS520SE.It is a nice radio.Get it tuned up and back to original and get a license.You wont regret it.Try this for info> [Please login or register to view this link] or [Please login or register to view this link] Good luck.