CBRT has been

info on beams

A place to ask questions about base setup for CB radios or HAM radios. Talk about your experiences, seek advice, and share knowledge.
Post Reply
User avatar
get r done
2 PILL USER
2 PILL USER
Posts: 15
Joined: Feb 16 2008, 21:05

info on beams

#155104

Post by get r done »

i'm lookin into getten 6 element beam. need opinions on witch will work best for local range.maco,gizmo,jogun,signal eng. i have hygain stack 3 now just want little more punch.any input would be very helpful from anyone thank you
User avatar
linx

#155106

Post by linx »

I like signal engineering and maco. Signal engineering has great customer support. I think a SE and Maco will probably give you the same results.

I am not a fan of Gizmotchy antennas....they are very hard to tune. I am very skeptical of Jo-Gunns antenna gains, and would be weary of paying that much for a beam.

You may be able to find an old Moonraker 6 as well which is an outstanding antenna.

I would send Maco and SE a e-mail, and whoever gets back quicker, buy from them. Customer service is nice with a big purchase like this.

Rob
User avatar
get r done
2 PILL USER
2 PILL USER
Posts: 15
Joined: Feb 16 2008, 21:05

#155116

Post by get r done »

thats the way i was thinkin.i used to have mr 6 10 years ago it was sweet but never had it high enough jogun has crazy claims but you never know. just lookin for as much info as possible before spending tons of money
User avatar
468
Donor
Donor
Posts: 86
Joined: Oct 31 2007, 04:17
Handle: silver bullet
Real Name: LCT
Call Sign: w8gnp
Antenna: JO GUn
Radio: RCI 2995 PRO746
Contact:

#155135

Post by 468 »

I have a joegunn 4 plus 4 shooting star it works most of the time i talk ship just on radio 2995 rci I had a maco comet that work just ok
User avatar
225/Greg
Donor
Donor
Posts: 85
Joined: Nov 08 2007, 17:36
Real Name: Greg
Radio: Cobra 2000GTL
Contact:

#155152

Post by 225/Greg »

If your only worried about local, then just make your own six element yagi and mount it vertically! You must already have a gamma match. All you really need is a few more elements and a longer boom. You can use a Maco design for reference!

225/Greg
User avatar
231

#155166

Post by 231 »

Seems like a very small step up going from a stacked 3 to a straight 6 (to me anyway). If you considered dual polarity though, it'd be a nice improvement IMO. SE quad would be a very effective way to go and my personal favorite and first choice, then the Laser400 or 500 if you have the room, rotor, and support structure to handle them.

Just my $.02
;)
User avatar
DX_MONKEY

#155185

Post by DX_MONKEY »

If you already have a stacked 3 and need more punch? Sounds like you need more power. Get an amp!
User avatar
get r done
2 PILL USER
2 PILL USER
Posts: 15
Joined: Feb 16 2008, 21:05

#155200

Post by get r done »

I was thinkin quad. guess I could make my own out of the 3's. whats the gain diff between 3' and laser 400?
User avatar
get r done
2 PILL USER
2 PILL USER
Posts: 15
Joined: Feb 16 2008, 21:05

#155216

Post by get r done »

thanks for ideas think might go real big stack 6's
User avatar
PONY EXPRESS
Wordwide & Qualified
Wordwide & Qualified
Posts: 986
Joined: Aug 09 2007, 21:04
Radio: GOLDEN EAGLE Mark IV
Contact:

#155232

Post by PONY EXPRESS »

Well actually your stacked 3 beams have very good gain as they are . The difference between a 6 element and your stacked 3's well is not enough difference for the added cost.
Now another thing to consider would getting an antenna that does both horizontal and vertical polarity . Perhaps a Shooting Star which is equivalent to a Moonraker 4 might be an alternative. If your looking for longer boom and highest gain I go without hesitation to the 6 element Cubical Quad that Signal Engineering makes.It will do you a magnificent job
Image

Finding a Moonraker 6 would be nice as well
Image
Post Reply