I used 636 and d104 mics
not happy with clearity
any ideas???
thanks
Message from moderator Bozo
please ensure that you post your questions in the correct forum
connex 4600 turbo
-
spot
- NEW DUCK
- Posts: 3
- Joined: January 13th, 2019, 9:09 am
- Real Name: dave devlin
connex 4600 turbo
I have a connex 4600 turbo
I used 636 and d104 mics
not happy with clearity
any ideas???
thanks
I used 636 and d104 mics
not happy with clearity
any ideas???
thanks
-
Lost Ram
- Donor
- Posts: 1,094
- Joined: September 22nd, 2009, 8:46 am
- Handle: Lost Ram
- Real Name: Kerry
- Antenna: 570' Loop with 600 ohm open feed line
- Radio: Yaesu FTDX 101 MP / TRC-450
- Contact:
Re: connex 4600 turbo
If the audio circuit has been modified you might have a hard time getting it to sound clean. Try reducing the mic gain and the power, this should clear up the audio if its been modified, well maybe. Also try reducing the gain on the mic too.
CB: TRC-450, Imax
Ham: FTDX101MP, FT-991A ,FT8900-2 meter crossband rig
Ham Antennas: 570', 500', wire loops, 2M Copper Slim Jim X2, CG-144 mobile
"The two enemies of the people are criminals and government. So let us tie the second down with the chains of the Constitution so that the second will not become the legal version of the first."
Thomas Jefferson.
Ham: FTDX101MP, FT-991A ,FT8900-2 meter crossband rig
Ham Antennas: 570', 500', wire loops, 2M Copper Slim Jim X2, CG-144 mobile
"The two enemies of the people are criminals and government. So let us tie the second down with the chains of the Constitution so that the second will not become the legal version of the first."
Thomas Jefferson.
-
MDYoungblood
Verified - Site Admin
- Posts: 10,808
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: connex 4600 turbo
I'm with Lost Ram on this one. The radio has probably been max'ed out on the "peak and tune" by whoever done it. The radio needs to be realigned properly and have the mic you plan on using with the radio, that way the tech can adjust everything using it.
3's
Greg
3's
Greg
