Cobra 19GTL On/Off Volume pot

[Phantom43]

The on/off switch contact is a bit dodgy, tried some switch cleaner but I would be happy to replace it if I could find one as it's a great little rig.

So does anyone know of a source for the on/off volume pot for a 19GTL?

Richard

[MDYoungblood]

Look in the CB World website, (sponsor), might find one there, he has a lot of Cobra parts.

3's

Greg

[Phantom43]

Will do, thanks.

[TNT1450]

Darn... I've got a junked 19GTL but it's only the board and frame. The entire front end of the radio is gone.

Do you know what value the pot is? I may have one.

[Phantom43]

I haven't stripped the front down yet to see the actual pot but the schematic on CBtricks says 50KB.

Richard

[TNT1450]

OK, that means 50KOhm, linear (B) pot. With switch too, I imagine? I'll have to check and see what I have. I might need to know how long the shaft is as well, because I've got some which are short and others which are very long.

[Phantom43]

I would think it's a short one, can't completely measure it in situ but the splined section is 3/8" long.

Richard