Galaxy Saturn (not turbo) loud power supply hum/buzz? Nelp?
- adamf
- 6 PILL USER
- Posts: 56
- Joined: Jan 19 2016, 08:47
- Handle: Adam
- Real Name: Adam
- Call Sign: W4AJF
- Radio: Browning Golden Eagle Mark IVA
- Contact:
Galaxy Saturn (not turbo) loud power supply hum/buzz? Nelp?
Hi all, I have a Galaxy Saturn (not turbo) and this evening when I went to transmit there is a pretty loud buzz/hum. When I am not transmitting I can hear it a little when volume is turned down but when I transmit it's fairly loud. On AM it's loud and on SSB it's low until I modulate and gets louder as the output increases with modulation. I did not opened the radio but I will try to tomorrow so perhaps someone may be familiar and tell me what to look for? I know to be careful and I am fairly handy. Thanks for any help. Adam
Merge Complete
Added 14 hours 1 minute 6 seconds after previous.
Hi, so I opened up the radio and when I transmit the power transformer is buzzing, if I press on top of it to stop some of the vibration it lessens, can it still be the bridge rectifier? If not does anyone know what I can do? Thanks, Adam
Merge Complete
Added 1 hour 53 minutes 55 seconds after previous.
Hi all, I am not the best at this, can I do a simple test on the power transformer? It has 2 wires in and 2 wires out. On the 2 wires in I should get 120VAC give or take, yes? On the wires out BEFORE the bridge rectifier what should I see approx for VAC output? Thanks, Adam
Merge Complete
Added 14 hours 1 minute 6 seconds after previous.
Hi, so I opened up the radio and when I transmit the power transformer is buzzing, if I press on top of it to stop some of the vibration it lessens, can it still be the bridge rectifier? If not does anyone know what I can do? Thanks, Adam
Merge Complete
Added 1 hour 53 minutes 55 seconds after previous.
Hi all, I am not the best at this, can I do a simple test on the power transformer? It has 2 wires in and 2 wires out. On the 2 wires in I should get 120VAC give or take, yes? On the wires out BEFORE the bridge rectifier what should I see approx for VAC output? Thanks, Adam
- MDYoungblood
- Site Admin
- Posts: 10,808
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Galaxy Saturn (not turbo) loud power supply hum/buzz? Nelp?
Most times the hum or buzzing sound is caused by the capacitors in the power supply section are going south. since you still have enough output to transmit, it is probably just one but it would be best to replace them all because of the age of the radio. Don't have a schematic so I can't say the test points for 120acv or the side of the rectifier that should be 13.8dcv.
3's
Greg
3's
Greg
- adamf
- 6 PILL USER
- Posts: 56
- Joined: Jan 19 2016, 08:47
- Handle: Adam
- Real Name: Adam
- Call Sign: W4AJF
- Radio: Browning Golden Eagle Mark IVA
- Contact:
Galaxy Saturn (not turbo) loud power supply hum/buzz? Nelp?
Hi Greg, I would up taking out the transformer etc and replaced it with a switching supply, works very now and quiet! Thanks, Adam
- MDYoungblood
- Site Admin
- Posts: 10,808
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Galaxy Saturn (not turbo) loud power supply hum/buzz? Nelp?
That is actually the best thing to do, and I think Mega-Watt is still a sponsor here. I believe this one will fit,adamf wrote: Dec 23 2020, 12:27 Hi Greg, I would up taking out the transformer etc and replaced it with a switching supply, works very now and quiet! Thanks, Adam
[Please login or register to view this link]
3's
Greg
- Bozo
- Owner
- Posts: 9,452
- Joined: Aug 31 2004, 13:06
- Handle: Bozo The Clown
- Real Name: James Wadsworth
- Antenna: Monkey Made MM9
- Radio: General Lee Radio
- Contact:
Galaxy Saturn (not turbo) loud power supply hum/buzz? Nelp?
[Please login or register to view this link] is a wonderful sponsor of ours!