mic wiring for a para dynamics PDC69 for a Yaesu FT-757GX
- jvander1975
- NEW DUCK
- Posts: 0
- Joined: February 27th, 2022, 7:46 am
mic wiring for a para dynamics PDC69 for a Yaesu FT-757GX
i cant seem to find anything online for mic wiring for the para dynamics PDC69 desk mic.
any help would be great here.
thank you
Justin
255 barracuda NY
73's
any help would be great here.
thank you
Justin
255 barracuda NY
73's
-
MDYoungblood Verified
- Site Admin
- Posts: 10,740
- Joined: June 12th, 2010, 8:05 pm
The wiring for this microphone is,
Shield= GROUND
White= MODULATION
Red= PTT
Black= RX
Blue= Switching ground (may need to connect with ground on some radios)
Look at a schematic for the radio to see the pinout for it, my guess would be the black wire won't need connecting.
3's
Greg
Shield= GROUND
White= MODULATION
Red= PTT
Black= RX
Blue= Switching ground (may need to connect with ground on some radios)
Look at a schematic for the radio to see the pinout for it, my guess would be the black wire won't need connecting.
3's
Greg
- jvander1975
- NEW DUCK
- Posts: 0
- Joined: February 27th, 2022, 7:46 am
there is only 4 wires on the para dynamics, black, shield, red and looks like pink or lavender color
-
MDYoungblood Verified
- Site Admin
- Posts: 10,740
- Joined: June 12th, 2010, 8:05 pm
Okay, to check the wiring use an ohmmeter to check what color wires are the PTT and RX or remove the bottom plate and see how the switch is wired, at the same time look at what wire would be modulation. If it runs to the switch it probably disconnects on RX.
3's
Greg
3's
Greg