Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
Cobra 25 ltd
-
smoke blower
- Donor
- Posts: 424
- Joined: Jun 26 2011, 18:05
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Cobra 25 ltd
Need help I have no power at the channel selector on this cobra 25 ltd classic channel selector has no read out
Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
Post Merge Complete
Added 1 hour 1 minute 48 seconds after previous.
I got the voltage regulator for it replaced but some of the channel segments is very weak can just barely see them
-
MDYoungblood
Verified - Site Admin
- Posts: 10,798
- Joined: Jun 12 2010, 20:05
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Check the connectors going to the display, could just be dirty. It is an old radio and the digits may have deteriorated, it happens.
3’s
Greg
3’s
Greg
-
smoke blower
- Donor
- Posts: 424
- Joined: Jun 26 2011, 18:05
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Thank you I finally got the channel selector straight now my issue is the audio chip gets very very hot and low receive audio I have replaced quite a few caps around the audio chip but no luck . The final was blown as well when I received the radio I just can't find what is wrong
