Turner plus2 wired kenwood 8 pin
-
gsh82962
- NEW DUCK
- Posts: 0
- Joined: Jan 15 2023, 05:52
- Handle: Landlord
- Real Name: Gary
- Antenna: Maco
- Radio: Kenwood
- Contact:
Turner plus2 wired kenwood 8 pin
Does anybody have a wiring diagram for a Turner plus 2 wired to a Kenwood TS 440s 8 Pin thank you
-
De_Wildfire
- Donor
- Posts: 929
- Joined: Jun 14 2009, 19:46
- Handle: De_Wildfire
- Real Name: Greg
- Antenna: Imax 2000. Hex Beam, G5RV dipole, Jpole(UHF/VHF) Austin Suburban Tri Band (UHF/VHF)
- Radio: Washington, Tram D201, Tram D64, Robyn 520D, Cobra 139XLR, Elecraft K3S, Kenwood 590S, Yaesu FTM 400DR, Alinco DR-235, ADI-146
- Contact:
I found this and I'm going to copy it just as it says on paper. Quite a few years ago, I had a Turner and a 575-M6 hand held mic. I had them both wired to my Elecraft K3. Come to find out, once it was wired, it worked on my Kenwood TS-590S, My Alinco DR-235 mobile and my ADI-146 mobile. The tech at the shop gave me this and it was buried on the shelf. Hope this helps. I just copied exactly what the tech wrote down. The Turner mic worked well but didn't sound as good as the 575-M6 hand mic. I prefer more wide rage audio but that is my preference. I am assuming the numbers are like looking at numbers on a clock. Hope this helps.
RED & BLACK PTT
WHITE > AUDIO
2 PTT >RED WIRE
7,8 GROUND> BLACK WIRE
1 AUDIO > WHITE AUDIO
Post Merge Complete
Added 4 minutes 1 second after previous.
Welcome to the Forum.
RED & BLACK PTT
WHITE > AUDIO
2 PTT >RED WIRE
7,8 GROUND> BLACK WIRE
1 AUDIO > WHITE AUDIO
Post Merge Complete
Added 4 minutes 1 second after previous.
Welcome to the Forum.
